GS-OC controller is mainly used in controlling aviation obstruction light

Written By Distributor Lampu Philips PT Savont Varavi IND on Selasa, 05 Juni 2018 | 19.30

GS-OC controller is mainly used in controlling aviation obstruction light ,shell adopts aluminum alloy with full sealing structure,

provide light weight and strong Anti Oxidant. Control circuit is good at impact resistance. The controller can direct single light or double light to work at the same

time and monitor them. It will have fault alarm,when lights failed. It is with anti-surge device which can be applied to harsh working environment.

Features

One photocell, which can let three Low-intensity Single Aviation Light with LED or incandescent light and one low-intensity double aviation light with LED or incandescent light work at night and close during the day automatically at the same time.
One convertingswitch between Steady-burning mode and Flashing mode for low-intensity single aviation light with non-solar powered way.
Faultalarm function and remote monitoring function. When one of six lights failed, controller will reveal status information by relevant LED indicator light and output alarm signal to BTS via dry contact.

Attention / Usage Tips

Please don’t input the wrong supply voltage.
Ensure there is not any short circuit with controller, or it will blow the fuse.
When connect to the incandescent aviation obstruction light, power consumption can not beyond the specification range, or it will blow the fuse or damage the controller.
Tighten the screws afterfinished the installation.
Non-professional workers cannot do the device maintenance, so as not to expand the error and be hurt.

Block
Airport
High Mastlamp
Chimney
Towers(Telecom, GSM, Electric)
Bridge
High-rise Buildings

Name	Parameter	Name	Parameter
Optional Power Rated Supply	AC120V（±15%） AC230V（±15%）	Load Power Level of Single Light	flashing≤200W×3,steady-burning≤116W×3
Power Rated Frequency	50HZ—60HZ	Load Power Level of Double Light	flashing≤200W, steady- burning≤50W
Power Consumption	≤10W	Monitoring Out-out	Dry contact open
Ambient Temperature	-55℃～+70℃	Installation Size	250mm×130mm×M4
Ambient Humidity	≤95%	Overall Size	290mm×260mm×90mm
Altitude Height	≤4500米	Anti-wind Ability	80m/s
IP Standard	IP65	Optical Sensitivity	50～100Lux
FAA Classify	L856/L857	Status Information	Red LED indicator
Adapt to Load Type	LED light & Incandescent light