GS-HI/B.LED High-intensity Type B Aviation Obstruction Light adopt

Written By Distributor Lampu Philips PT Savont Varavi IND on Selasa, 05 Juni 2018 | 18.19

GS-HI/B.LED High-intensity Type B Aviation Obstruction Light adopt with Aluminium alloy of the lacquer that bake,it has the specific of light weight and corrosion resistance .Inner this lamp set an environment that can high efficient reflect and cooperate with High borosilicate transmitting glass ,the light effect use ratio can be up to 91%;Light resource adopt with Precise integration chip packages,luminous efficiency is 5 times to normal LED.
management system has good protection function ,it can stop working when equipment short circuit,beyond temperature or working abnormal ,it can self-recovery normal after malfunction is excluded Advanced portable structure design for installation and transportation ,installation way can be adjustable according different situation ,it can be installed in any difficult places .
The inner of the equipment was reduced voltage ,complete machine ’s electric circuit in the low voltage of 30V working situation ,which can raise the equipment ’s service life ,meanwhile it can’t make any safety suffering to people who install and Light resource adopt with advanced LED technology,the service life is above 10 years ,which can save the cost of changing lamp for customers in the future .

Features

Aluminum alloybaked with lacquer base, provides lightest body and corrosion resistance.
Built-in efficient reflex attachment co-operates with tempered glass lens, and overall utilization rate of photosynthetic efficiency can reach 91%.
Precision integrated chip packaginglight source, its luminous efficiency is 5 times higher than common others’.
Comprehensive protection functioncontrol circuit. When the device works in short circuit, over temperature or out of operation, it will automatically stop working. After troubleshooting, it can be automatically back to work. This function can avoid device failure and reduce maintenance costs.
In terms of transportation and installation, this deviceadopts advanced portable structure design, and the ways of installation can also be adjusted according to actual condition. It still can be used in very hazard condition.
Low inside voltage condition of 30V,improves the service life of the device and will not
cause potential hazard to the operator during the installation and the maintenance.
Based on advanced LED technology, the service life of light source is to achieve
longer than 10 years , extremely reliable and cost-saving.

Attention / Usage Tips

Check whether the supply voltage does comply with the rated voltage of device.
Donot open it if the device is out of operation, in order not to be hurt by the internal high pressure.
Afterfinished the installation, the personnel must check whether the device is in a good waterproof processing and whether the screw spikes are tight
Non-professional workers can not do the device maintenance, in order not to expand the error and be hurt.

Block
Airport
High Mastlamp
Chimney
Telecom towers
Bridge
High-rise Buildings

Name	Parameter
FAA Classify	L-857
Type	GS-HI/B
Power Supply	Optional voltage: AC220V 、AC120V
Power Supply Frequency	50HZ～60HZ
Average Power Consumption/ Flashing Rate	≤80W / 450W
Quantity of LED	84×5W
Working Mode	Flashing 40times/minutes
Light Duration	150ms
Light Intensity	2000~100000cd（±25%）
Horizontal Out-put	90°～120°
Vertical Divergence	3°～ 7°
Service Life of the Light Source	≥10 years
Emitting Color	white
Overall Size	580mm×290mm×365mm
Installation Size	540mm×160mm×M10
IP Protection	IP65
Optically Controlled Ambient Brightness	50cd-500cd/m2
Ambient Temperature	-40℃～55℃
Weight	25kg
Anti-Wind Ability	80m/s
Background Intensity	Obstacle Light Effective Luminous Intensity
500cd/m2	100,000cd±25%
50~500cd/m2	20,000cd±25%
＜50cd/m2	2,000cd±25%