low intensity solar power obstruction light adopts

Written By Distributor Lampu Philips PT Savont Varavi IND on Senin, 04 Juni 2018 | 19.23

This low intensity solar power obstruction light adopts insert solar panel whose photoelectric conversion efficiency is high to 19% integrated design, cooperate with solar dedicated lithium iron phosphate battery as power supply. Control circuit adopts micro-power consumption single chip microcomputer control chip, which can more precise control the battery’s charge and discharge status; Meanwhile, it can reduce controlling circuit ’s power consumption; Light source adopts special customized LED chip, which has the specific of high light intensity, low power consumption, long service life and so on. Lampshade adopts PC material, which can corrosion resistance, anti-UV anti-shock. The base adopts marine-grade dedicated plastic material, it can apply to seaways, bridge and chemical plant that have hostile and strong corrosive environment.

Function & Features

Continuous working time in rainy day can reach more than 20 days. (10 hours a day)
Photocell can switch ON/OFF the light in rainy days or at night automatically.
Standardization of optical design, high photoelectric conversion efficiency.
Adopts high efficient solar chip,photoelectric conversion efficiency is over 19%.
The integration of the waterproof design, it can work in soaking in sea water, High protection grade IP68.
Adopts special customized LED chip,transfer efficiency and service life is higher than normal LED.
Circuit adopts advanced charging and discharging management system,prolong battery’s life effectively.
The lamp extend state switch, it can adjust steady or flashing light working mode base on requirement.
Provides strong corrosion resistance, lightning resistance,UV resistance, impact resistance.
The base adopts marine-grade dedicated plastic material,it can apply to seaways ,riverway,chemical plant and airport that have hostile and strong corrosive environment.
With anti-bird device.
No radio frequency (rf), no electromagnetic interference.
Steady working, low cost.

Usage notice

Please read the instruction carefully and then use the device correctly.
Solar powered marine lantern must be installed in a sunny place to keep it working continuously.
Please install this light on the Installation plane that perpendicular to light axis, installation plane should has mechanical strength.
If the device fails to work at the first using time, please place the device under sunlight to recharge power 12hours, it will work.
Please turn off the device and put it in a dry place, to ensure the life of the battery.please put it in a sunlight for 5day(s) to recharge power each 3 months if it needs to be stored for a long time.
If there any other problem please contact us.

Block
Bridge
Towers
Communication tower
Chimney
Airport runway
Taxiway
Temporary military airport
Runway edge lights
Navigation beacon light
Heliport
Traffic barrier
Tower cranes

Name	Parameter	Name	Parameter
Type	GS-LS/A, GS-LS/B	Light Source Service Life	>100000 hours
Power Supply	Class A high efficient solar panel	Optional Emitting Color	Red
Battery capacity	3.2V3.3AH	Battery Type	Replaceable lithium iron phosphate battery
Solar panel power	2W	Battery life	>5years
Solar panel voltage	5.5V	Solar panel life	>20years
Instantaneous power	≤2W	Vertical Divergence	>8°
Visual range	1-5km	Horizontal Out-put	360°
Light source	LED	Overall Size(mm)	186mm(D)×190mm(H)
Storage temperature	-40℃~70℃	Installation Size	170mmx170mm×M6
Working Temperature	-20℃~60℃	Anti-wind Ability	80m/s
steady light intensity	20CD	flashing light intensity	>36CD
Weight	1.2kg	Working mode	Flashing/steady(default flash 20 times/m)
Continuous working time in rainy day	> 20days( work 10 hours a day)	Optically Controlled Ambient Brightness	300LUX±100LUX
IP Standard	IP68